+86-0574-88325077+86-0574-88032177
The ingot spreader adopts the working principle of automatic opening and closing, its structure is simple and reasonable, the action is flexible, and the lifting is safe and reliable. It does not need to provide any power source. It is locked by its own weight, and the shutter is positioned to autom... read more
(1) During the use of the spreader, if the twist lock is inflexible or not in place, check the adjustment nut, and then check the following parts: ①Whether the tension spring of the pawl is damaged, if damaged, it should be replaced; ②Whether the transmission mechanism is stuck, if it is stuck, it i... read more
According to the structure, container spreaders can be divided into two categories: non-telescopic fixed spreaders and telescopic spreaders. The fixed spreader can be divided into independent spreader and master-slave spreader (also called mother-child spreader). 1. Fixed spreader 1. Free-standing s... read more
1. Before using the beam spreader, firstly observe whether the beam body has any abnormal phenomena such as deformation, cracks, and welding seams. The test hoisting process must meet the load's operating route, environmental conditions, and determine the lifting and lifting positions. If the liftin... read more
1. Sling is the general term for rigging and slings; slings refer to rigid devices used for lifting operations, including hooks, beams, c-shaped slings, clamps, shackles, vacuum suction cup slings, and magnetic slings With etc. Rigging refers to tying flexible components to lifting parts to bear the... read more